Jose

Jose

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • Jose
    Participant
    Post count: 3

    Hi everyone,

    Not sure if I am posting in the right forum but can someone here provide some info as to how to successfully install O365-2016 via the deployment toolkit? I have tried numerous ways but keep getting the “Installation Failed” balloon from the taskbar. Here is the script I am using. Not sure if I’m missing something but any help will be appreciated.

    <#
    .SYNOPSIS
    This script performs the installation or uninstallation of an application(s).
    .DESCRIPTION
    The script is provided as a template to perform an install or uninstall of an application(s).
    The script either performs an “Install” deployment type or an “Uninstall” deployment type.
    The install deployment type is broken down into 3 main sections/phases: Pre-Install, Install, and Post-Install.
    The script dot-sources the AppDeployToolkitMain.ps1 script which contains the logic and functions required to install or uninstall an application.
    .PARAMETER DeploymentType
    The type of deployment to perform. Default is: Install.
    .PARAMETER DeployMode
    Specifies whether the installation should be run in Interactive, Silent, or NonInteractive mode. Default is: Interactive. Options: Interactive = Shows dialogs, Silent = No dialogs, NonInteractive = Very silent, i.e. no blocking apps. NonInteractive mode is automatically set if it is detected that the process is not user interactive.
    .PARAMETER AllowRebootPassThru
    Allows the 3010 return code (requires restart) to be passed back to the parent process (e.g. SCCM) if detected from an installation. If 3010 is passed back to SCCM, a reboot prompt will be triggered.
    .PARAMETER TerminalServerMode
    Changes to “user install mode” and back to “user execute mode” for installing/uninstalling applications for Remote Destkop Session Hosts/Citrix servers.
    .PARAMETER DisableLogging
    Disables logging to file for the script. Default is: $false.
    .EXAMPLE
    powershell.exe -Command “& { & ‘.\Deploy-Application.ps1’ -DeployMode ‘Silent’; Exit $LastExitCode }”
    .EXAMPLE
    powershell.exe -Command “& { & ‘.\Deploy-Application.ps1’ -AllowRebootPassThru; Exit $LastExitCode }”
    .EXAMPLE
    powershell.exe -Command “& { & ‘.\Deploy-Application.ps1’ -DeploymentType ‘Uninstall’; Exit $LastExitCode }”
    .EXAMPLE
    Deploy-Application.exe -DeploymentType “Install” -DeployMode “Silent”
    .NOTES
    Toolkit Exit Code Ranges:
    60000 – 68999: Reserved for built-in exit codes in Deploy-Application.ps1, Deploy-Application.exe, and AppDeployToolkitMain.ps1
    69000 – 69999: Recommended for user customized exit codes in Deploy-Application.ps1
    70000 – 79999: Recommended for user customized exit codes in AppDeployToolkitExtensions.ps1
    .LINK

    #>
    [CmdletBinding()]
    Param (
    [Parameter(Mandatory=$false)]
    [ValidateSet(‘Install’,’Uninstall’)]
    [string]$DeploymentType = ‘Install’,
    [Parameter(Mandatory=$false)]
    [ValidateSet(‘Interactive’,’Silent’,’NonInteractive’)]
    [string]$DeployMode = ‘Interactive’,
    [Parameter(Mandatory=$false)]
    [switch]$AllowRebootPassThru = $false,
    [Parameter(Mandatory=$false)]
    [switch]$TerminalServerMode = $false,
    [Parameter(Mandatory=$false)]
    [switch]$DisableLogging = $false
    )

    Try {
    ## Set the script execution policy for this process
    Try { Set-ExecutionPolicy -ExecutionPolicy ‘ByPass’ -Scope ‘Process’ -Force -ErrorAction ‘Stop’ } Catch {}

    ##*===============================================
    ##* VARIABLE DECLARATION
    ##*===============================================
    ## Variables: Application
    [string]$appVendor = ‘Microsoft’
    [string]$appName = ‘Office 2016’
    [string]$appVersion = ‘16.0.6001.1068’
    [string]$appArch = ‘x86’
    [string]$appLang = ‘EN’
    [string]$appRevision = ’01’
    [string]$appScriptVersion = ‘1.0.0’
    [string]$appScriptDate = ’04/06/2016′
    [string]$appScriptAuthor = ‘IT’
    ##*===============================================
    ## Variables: Install Titles (Only set here to override defaults set by the toolkit)
    [string]$installName = ”
    [string]$installTitle = ”

    ##* Do not modify section below
    #region DoNotModify

    ## Variables: Exit Code
    [int32]$mainExitCode = 0

    ## Variables: Script
    [string]$deployAppScriptFriendlyName = ‘Deploy Application’
    [version]$deployAppScriptVersion = [version]’3.6.8′
    [string]$deployAppScriptDate = ’02/06/2016′
    [hashtable]$deployAppScriptParameters = $psBoundParameters

    ## Variables: Environment
    If (Test-Path -LiteralPath ‘variable:HostInvocation’) { $InvocationInfo = $HostInvocation } Else { $InvocationInfo = $MyInvocation }
    [string]$scriptDirectory = Split-Path -Path $InvocationInfo.MyCommand.Definition -Parent

    ## Dot source the required App Deploy Toolkit Functions
    Try {
    [string]$moduleAppDeployToolkitMain = “$scriptDirectory\AppDeployToolkit\AppDeployToolkitMain.ps1”
    If (-not (Test-Path -LiteralPath $moduleAppDeployToolkitMain -PathType ‘Leaf’)) { Throw “Module does not exist at the specified location [$moduleAppDeployToolkitMain].” }
    If ($DisableLogging) { . $moduleAppDeployToolkitMain -DisableLogging } Else { . $moduleAppDeployToolkitMain }
    }
    Catch {
    If ($mainExitCode -eq 0){ [int32]$mainExitCode = 60008 }
    Write-Error -Message “Module [$moduleAppDeployToolkitMain] failed to load: n$($_.Exception.Message)n `n$($_.InvocationInfo.PositionMessage)” -ErrorAction ‘Continue’
    ## Exit the script, returning the exit code to SCCM
    If (Test-Path -LiteralPath ‘variable:HostInvocation’) { $script:ExitCode = $mainExitCode; Exit } Else { Exit $mainExitCode }
    }

    #endregion
    ##* Do not modify section above
    ##*===============================================
    ##* END VARIABLE DECLARATION
    ##*===============================================

    If ($deploymentType -ine ‘Uninstall’) {
    ##*===============================================
    ##* PRE-INSTALLATION
    ##*===============================================
    [string]$installPhase = ‘Pre-Installation’

    ## Show Welcome Message, close Internet Explorer if required, allow up to 3 deferrals, verify there is enough disk space to complete the install, and persist the prompt
    Show-InstallationWelcome -CloseApps ‘WINWORD,EXCEL,OUTLOOK,POWERPNT,ONENOTE,MSPUB,NitroPDF’ -BlockExecution -AllowDefer -CheckDiskSpace -PersistPrompt -CloseAppsCountdown 60

    ## Show Progress Message (with the default message)
    Show-InstallationProgress -StatusMessage “Office 365 Installation in Progress…The Installation may take up to 45 minutes to complete.”

    ## <Perform Pre-Installation tasks here>

    ##*===============================================
    ##* INSTALLATION
    ##*===============================================
    [string]$installPhase = ‘Installation’

    ## Handle Zero-Config MSI Installations
    If ($useDefaultMsi) {
    [hashtable]$ExecuteDefaultMSISplat = @{ Action = ‘Install’; Path = $defaultMsiFile }; If ($defaultMstFile) { $ExecuteDefaultMSISplat.Add(‘Transform’, $defaultMstFile) }
    Execute-MSI @ExecuteDefaultMSISplat; If ($defaultMspFiles) { $defaultMspFiles | ForEach-Object { Execute-MSI -Action ‘Patch’ -Path $_ } }
    }

    ## <Perform Installation tasks here>
    ##Show-InstallationProgress -StatusMessage “Upgrading to the NEW Office 2016. Please wait while installation completes…”
    Execute-Process -Path “.\Setup.exe” -Parameters “/configure /configuration.xml”

    ##*===============================================
    ##* POST-INSTALLATION
    ##*===============================================
    [string]$installPhase = ‘Post-Installation’

    ## <Perform Post-Installation tasks here>

    ## Display a message at the end of the install
    If (-not $useDefaultMsi) { Show-InstallationPrompt -Message ‘Your Office Upgrade has been Completed. Should you have any questions, please call the Help Desk at (954)627-9353’ -ButtonRightText ‘OK’ -Icon Information -NoWait }
    }
    ElseIf ($deploymentType -ieq ‘Uninstall’)
    {
    ##*===============================================
    ##* PRE-UNINSTALLATION
    ##*===============================================
    [string]$installPhase = ‘Pre-Uninstallation’

    ## Show Welcome Message, close Internet Explorer with a 60 second countdown before automatically closing
    Show-InstallationWelcome -CloseApps ‘iexplore’ -CloseAppsCountdown 60

    ## Show Progress Message (with the default message)
    Show-InstallationProgress

    ## <Perform Pre-Uninstallation tasks here>

    ##*===============================================
    ##* UNINSTALLATION
    ##*===============================================
    [string]$installPhase = ‘Uninstallation’

    ## Handle Zero-Config MSI Uninstallations
    If ($useDefaultMsi) {
    [hashtable]$ExecuteDefaultMSISplat = @{ Action = ‘Uninstall’; Path = $defaultMsiFile }; If ($defaultMstFile) { $ExecuteDefaultMSISplat.Add(‘Transform’, $defaultMstFile) }
    Execute-MSI @ExecuteDefaultMSISplat
    }

    # <Perform Uninstallation tasks here>

    ##*===============================================
    ##* POST-UNINSTALLATION
    ##*===============================================
    [string]$installPhase = ‘Post-Uninstallation’

    ## <Perform Post-Uninstallation tasks here>

    }

    ##*===============================================
    ##* END SCRIPT BODY
    ##*===============================================

    ## Call the Exit-Script function to perform final cleanup operations
    Exit-Script -ExitCode $mainExitCode
    }
    Catch {
    [int32]$mainExitCode = 60001
    [string]$mainErrorMessage = “$(Resolve-Error)”
    Write-Log -Message $mainErrorMessage -Severity 3 -Source $deployAppScriptFriendlyName
    Show-DialogBox -Text $mainErrorMessage -Icon ‘Stop’
    Exit-Script -ExitCode $mainExitCode
    }

    • This reply was modified 1 year, 9 months ago by  Jose.
  • Jose
    Participant
    Post count: 3

    Hi Jason,

    I know this forum is 4 weeks old but I stumbled upon it in my search to finding a way to use the deployment toolkit to install Office 365 2016. I saw your setup but I can’t seem to get mine to work. I keep receiving an error balloon stating “Installation Failed” from the taskbar. Not sure what I am missing but here is the script I developed. Can you or anyone else see where am I going wrong? I already placed all of the files for office install (ie. setup.exe and the .xml) within the same folder as the “Deploy-Application.ps1″.

    <pre class=”brush: powershell; gutter: true; first-line: 1; highlight: []; html-script: false”><#
    .SYNOPSIS
    This script performs the installation or uninstallation of an application(s).
    .DESCRIPTION
    The script is provided as a template to perform an install or uninstall of an application(s).
    The script either performs an "Install" deployment type or an "Uninstall" deployment type.
    The install deployment type is broken down into 3 main sections/phases: Pre-Install, Install, and Post-Install.
    The script dot-sources the AppDeployToolkitMain.ps1 script which contains the logic and functions required to install or uninstall an application.
    .PARAMETER DeploymentType
    The type of deployment to perform. Default is: Install.
    .PARAMETER DeployMode
    Specifies whether the installation should be run in Interactive, Silent, or NonInteractive mode. Default is: Interactive. Options: Interactive = Shows dialogs, Silent = No dialogs, NonInteractive = Very silent, i.e. no blocking apps. NonInteractive mode is automatically set if it is detected that the process is not user interactive.
    .PARAMETER AllowRebootPassThru
    Allows the 3010 return code (requires restart) to be passed back to the parent process (e.g. SCCM) if detected from an installation. If 3010 is passed back to SCCM, a reboot prompt will be triggered.
    .PARAMETER TerminalServerMode
    Changes to "user install mode" and back to "user execute mode" for installing/uninstalling applications for Remote Destkop Session Hosts/Citrix servers.
    .PARAMETER DisableLogging
    Disables logging to file for the script. Default is: $false.
    .EXAMPLE
    powershell.exe -Command "& { & '.\Deploy-Application.ps1' -DeployMode 'Silent'; Exit $LastExitCode }"
    .EXAMPLE
    powershell.exe -Command "& { & '.\Deploy-Application.ps1' -AllowRebootPassThru; Exit $LastExitCode }"
    .EXAMPLE
    powershell.exe -Command "& { & '.\Deploy-Application.ps1' -DeploymentType 'Uninstall'; Exit $LastExitCode }"
    .EXAMPLE
    Deploy-Application.exe -DeploymentType "Install" -DeployMode "Silent"
    .NOTES
    Toolkit Exit Code Ranges:
    60000 – 68999: Reserved for built-in exit codes in Deploy-Application.ps1, Deploy-Application.exe, and AppDeployToolkitMain.ps1
    69000 – 69999: Recommended for user customized exit codes in Deploy-Application.ps1
    70000 – 79999: Recommended for user customized exit codes in AppDeployToolkitExtensions.ps1
    .LINK

    #>
    [CmdletBinding()]
    Param (
    [Parameter(Mandatory=$false)]
    [ValidateSet('Install','Uninstall')]
    [string]$DeploymentType = 'Install',
    [Parameter(Mandatory=$false)]
    [ValidateSet('Interactive','Silent','NonInteractive')]
    [string]$DeployMode = 'Interactive',
    [Parameter(Mandatory=$false)]
    [switch]$AllowRebootPassThru = $false,
    [Parameter(Mandatory=$false)]
    [switch]$TerminalServerMode = $false,
    [Parameter(Mandatory=$false)]
    [switch]$DisableLogging = $false
    )

    Try {
    ## Set the script execution policy for this process
    Try { Set-ExecutionPolicy -ExecutionPolicy 'ByPass' -Scope 'Process' -Force -ErrorAction 'Stop' } Catch {}

    ##*===============================================
    ##* VARIABLE DECLARATION
    ##*===============================================
    ## Variables: Application
    [string]$appVendor = 'Microsoft'
    [string]$appName = 'Office 2016'
    [string]$appVersion = '16.0.6001.1068'
    [string]$appArch = 'x86'
    [string]$appLang = 'EN'
    [string]$appRevision = '01'
    [string]$appScriptVersion = '1.0.0'
    [string]$appScriptDate = '04/06/2016'
    [string]$appScriptAuthor = 'IT'
    ##*===============================================
    ## Variables: Install Titles (Only set here to override defaults set by the toolkit)
    [string]$installName = ''
    [string]$installTitle = ''

    ##* Do not modify section below
    #region DoNotModify

    ## Variables: Exit Code
    [int32]$mainExitCode = 0

    ## Variables: Script
    [string]$deployAppScriptFriendlyName = 'Deploy Application'
    [version]$deployAppScriptVersion = [version]'3.6.8'
    [string]$deployAppScriptDate = '02/06/2016'
    [hashtable]$deployAppScriptParameters = $psBoundParameters

    ## Variables: Environment
    If (Test-Path -LiteralPath 'variable:HostInvocation') { $InvocationInfo = $HostInvocation } Else { $InvocationInfo = $MyInvocation }
    [string]$scriptDirectory = Split-Path -Path $InvocationInfo.MyCommand.Definition -Parent

    ## Dot source the required App Deploy Toolkit Functions
    Try {
    [string]$moduleAppDeployToolkitMain = "$scriptDirectory\AppDeployToolkit\AppDeployToolkitMain.ps1"
    If (-not (Test-Path -LiteralPath $moduleAppDeployToolkitMain -PathType 'Leaf')) { Throw "Module does not exist at the specified location [$moduleAppDeployToolkitMain]." }
    If ($DisableLogging) { . $moduleAppDeployToolkitMain -DisableLogging } Else { . $moduleAppDeployToolkitMain }
    }
    Catch {
    If ($mainExitCode -eq 0){ [int32]$mainExitCode = 60008 }
    Write-Error -Message "Module [$moduleAppDeployToolkitMain] failed to load: n$($_.Exception.Message)n `n$($_.InvocationInfo.PositionMessage)" -ErrorAction 'Continue'
    ## Exit the script, returning the exit code to SCCM
    If (Test-Path -LiteralPath 'variable:HostInvocation') { $script:ExitCode = $mainExitCode; Exit } Else { Exit $mainExitCode }
    }

    #endregion
    ##* Do not modify section above
    ##*===============================================
    ##* END VARIABLE DECLARATION
    ##*===============================================

    If ($deploymentType -ine 'Uninstall') {
    ##*===============================================
    ##* PRE-INSTALLATION
    ##*===============================================
    [string]$installPhase = 'Pre-Installation'

    ## Show Welcome Message, close Internet Explorer if required, allow up to 3 deferrals, verify there is enough disk space to complete the install, and persist the prompt
    Show-InstallationWelcome -CloseApps 'WINWORD,EXCEL,OUTLOOK,POWERPNT,ONENOTE,MSPUB,NitroPDF' -BlockExecution -AllowDefer -CheckDiskSpace -PersistPrompt -CloseAppsCountdown 60

    ## Show Progress Message (with the default message)
    Show-InstallationProgress -StatusMessage “Office 365 Installation in Progress…The Installation may take up to 45 minutes to complete.”

    ## <Perform Pre-Installation tasks here>

    ##*===============================================
    ##* INSTALLATION
    ##*===============================================
    [string]$installPhase = 'Installation'

    ## Handle Zero-Config MSI Installations
    If ($useDefaultMsi) {
    [hashtable]$ExecuteDefaultMSISplat = @{ Action = 'Install'; Path = $defaultMsiFile }; If ($defaultMstFile) { $ExecuteDefaultMSISplat.Add('Transform', $defaultMstFile) }
    Execute-MSI @ExecuteDefaultMSISplat; If ($defaultMspFiles) { $defaultMspFiles | ForEach-Object { Execute-MSI -Action 'Patch' -Path $_ } }
    }

    ## <Perform Installation tasks here>
    ##Show-InstallationProgress -StatusMessage "Upgrading to the NEW Office 2016. Please wait while installation completes…"
    Execute-Process -Path “.\Setup.exe” -Parameters “/configure /configuration.xml”

    ##*===============================================
    ##* POST-INSTALLATION
    ##*===============================================
    [string]$installPhase = 'Post-Installation'

    ## <Perform Post-Installation tasks here>

    ## Display a message at the end of the install
    If (-not $useDefaultMsi) { Show-InstallationPrompt -Message 'Your Office Upgrade has been Completed. Should you have any questions, please call the Help Desk at (954)627-9353' -ButtonRightText 'OK' -Icon Information -NoWait }
    }
    ElseIf ($deploymentType -ieq 'Uninstall')
    {
    ##*===============================================
    ##* PRE-UNINSTALLATION
    ##*===============================================
    [string]$installPhase = 'Pre-Uninstallation'

    ## Show Welcome Message, close Internet Explorer with a 60 second countdown before automatically closing
    Show-InstallationWelcome -CloseApps 'iexplore' -CloseAppsCountdown 60

    ## Show Progress Message (with the default message)
    Show-InstallationProgress

    ## <Perform Pre-Uninstallation tasks here>

    ##*===============================================
    ##* UNINSTALLATION
    ##*===============================================
    [string]$installPhase = 'Uninstallation'

    ## Handle Zero-Config MSI Uninstallations
    If ($useDefaultMsi) {
    [hashtable]$ExecuteDefaultMSISplat = @{ Action = 'Uninstall'; Path = $defaultMsiFile }; If ($defaultMstFile) { $ExecuteDefaultMSISplat.Add('Transform', $defaultMstFile) }
    Execute-MSI @ExecuteDefaultMSISplat
    }

    # <Perform Uninstallation tasks here>

    ##*===============================================
    ##* POST-UNINSTALLATION
    ##*===============================================
    [string]$installPhase = 'Post-Uninstallation'

    ## <Perform Post-Uninstallation tasks here>

    }

    ##*===============================================
    ##* END SCRIPT BODY
    ##*===============================================

    ## Call the Exit-Script function to perform final cleanup operations
    Exit-Script -ExitCode $mainExitCode
    }
    Catch {
    [int32]$mainExitCode = 60001
    [string]$mainErrorMessage = "$(Resolve-Error)"
    Write-Log -Message $mainErrorMessage -Severity 3 -Source $deployAppScriptFriendlyName
    Show-DialogBox -Text $mainErrorMessage -Icon 'Stop'
    Exit-Script -ExitCode $mainExitCode
    }

    • This reply was modified 1 year, 9 months ago by  Jose.
  • Jose
    Participant
    Post count: 3

    Hi Jason,

    I know this forum is 4 weeks old but I stumbled upon it in my search to finding a way to use the deployment toolkit to install Office 365 2016. I saw your setup but I can’t seem to get mine to work. I keep receiving an error balloon stating “Installation Failed” from the taskbar. Not sure what I am missing but here is the script I developed. Can you or anyone else see where am I going wrong? I already placed all of the files for office install (ie. setup.exe and the .xml) within the same folder as the “Deploy-Application.ps1″.

    <pre class=”brush: powershell; gutter: true; first-line: 1; highlight: []; html-script: false”><#
    .SYNOPSIS
    This script performs the installation or uninstallation of an application(s).
    .DESCRIPTION
    The script is provided as a template to perform an install or uninstall of an application(s).
    The script either performs an “Install” deployment type or an “Uninstall” deployment type.
    The install deployment type is broken down into 3 main sections/phases: Pre-Install, Install, and Post-Install.
    The script dot-sources the AppDeployToolkitMain.ps1 script which contains the logic and functions required to install or uninstall an application.
    .PARAMETER DeploymentType
    The type of deployment to perform. Default is: Install.
    .PARAMETER DeployMode
    Specifies whether the installation should be run in Interactive, Silent, or NonInteractive mode. Default is: Interactive. Options: Interactive = Shows dialogs, Silent = No dialogs, NonInteractive = Very silent, i.e. no blocking apps. NonInteractive mode is automatically set if it is detected that the process is not user interactive.
    .PARAMETER AllowRebootPassThru
    Allows the 3010 return code (requires restart) to be passed back to the parent process (e.g. SCCM) if detected from an installation. If 3010 is passed back to SCCM, a reboot prompt will be triggered.
    .PARAMETER TerminalServerMode
    Changes to “user install mode” and back to “user execute mode” for installing/uninstalling applications for Remote Destkop Session Hosts/Citrix servers.
    .PARAMETER DisableLogging
    Disables logging to file for the script. Default is: $false.
    .EXAMPLE
    powershell.exe -Command “& { & ‘.\Deploy-Application.ps1’ -DeployMode ‘Silent’; Exit $LastExitCode }”
    .EXAMPLE
    powershell.exe -Command “& { & ‘.\Deploy-Application.ps1’ -AllowRebootPassThru; Exit $LastExitCode }”
    .EXAMPLE
    powershell.exe -Command “& { & ‘.\Deploy-Application.ps1’ -DeploymentType ‘Uninstall’; Exit $LastExitCode }”
    .EXAMPLE
    Deploy-Application.exe -DeploymentType “Install” -DeployMode “Silent”
    .NOTES
    Toolkit Exit Code Ranges:
    60000 – 68999: Reserved for built-in exit codes in Deploy-Application.ps1, Deploy-Application.exe, and AppDeployToolkitMain.ps1
    69000 – 69999: Recommended for user customized exit codes in Deploy-Application.ps1
    70000 – 79999: Recommended for user customized exit codes in AppDeployToolkitExtensions.ps1
    .LINK

    #>
    [CmdletBinding()]
    Param (
    [Parameter(Mandatory=$false)]
    [ValidateSet(‘Install’,’Uninstall’)]
    [string]$DeploymentType = ‘Install’,
    [Parameter(Mandatory=$false)]
    [ValidateSet(‘Interactive’,’Silent’,’NonInteractive’)]
    [string]$DeployMode = ‘Interactive’,
    [Parameter(Mandatory=$false)]
    [switch]$AllowRebootPassThru = $false,
    [Parameter(Mandatory=$false)]
    [switch]$TerminalServerMode = $false,
    [Parameter(Mandatory=$false)]
    [switch]$DisableLogging = $false
    )

    Try {
    ## Set the script execution policy for this process
    Try { Set-ExecutionPolicy -ExecutionPolicy ‘ByPass’ -Scope ‘Process’ -Force -ErrorAction ‘Stop’ } Catch {}

    ##*===============================================
    ##* VARIABLE DECLARATION
    ##*===============================================
    ## Variables: Application
    [string]$appVendor = ‘Microsoft’
    [string]$appName = ‘Office 2016’
    [string]$appVersion = ‘16.0.6001.1068’
    [string]$appArch = ‘x86’
    [string]$appLang = ‘EN’
    [string]$appRevision = ’01’
    [string]$appScriptVersion = ‘1.0.0’
    [string]$appScriptDate = ’04/06/2016′
    [string]$appScriptAuthor = ‘IT’
    ##*===============================================
    ## Variables: Install Titles (Only set here to override defaults set by the toolkit)
    [string]$installName = ”
    [string]$installTitle = ”

    ##* Do not modify section below
    #region DoNotModify

    ## Variables: Exit Code
    [int32]$mainExitCode = 0

    ## Variables: Script
    [string]$deployAppScriptFriendlyName = ‘Deploy Application’
    [version]$deployAppScriptVersion = [version]’3.6.8′
    [string]$deployAppScriptDate = ’02/06/2016′
    [hashtable]$deployAppScriptParameters = $psBoundParameters

    ## Variables: Environment
    If (Test-Path -LiteralPath ‘variable:HostInvocation’) { $InvocationInfo = $HostInvocation } Else { $InvocationInfo = $MyInvocation }
    [string]$scriptDirectory = Split-Path -Path $InvocationInfo.MyCommand.Definition -Parent

    ## Dot source the required App Deploy Toolkit Functions
    Try {
    [string]$moduleAppDeployToolkitMain = “$scriptDirectory\AppDeployToolkit\AppDeployToolkitMain.ps1”
    If (-not (Test-Path -LiteralPath $moduleAppDeployToolkitMain -PathType ‘Leaf’)) { Throw “Module does not exist at the specified location [$moduleAppDeployToolkitMain].” }
    If ($DisableLogging) { . $moduleAppDeployToolkitMain -DisableLogging } Else { . $moduleAppDeployToolkitMain }
    }
    Catch {
    If ($mainExitCode -eq 0){ [int32]$mainExitCode = 60008 }
    Write-Error -Message “Module [$moduleAppDeployToolkitMain] failed to load: n$($_.Exception.Message)n `n$($_.InvocationInfo.PositionMessage)” -ErrorAction ‘Continue’
    ## Exit the script, returning the exit code to SCCM
    If (Test-Path -LiteralPath ‘variable:HostInvocation’) { $script:ExitCode = $mainExitCode; Exit } Else { Exit $mainExitCode }
    }

    #endregion
    ##* Do not modify section above
    ##*===============================================
    ##* END VARIABLE DECLARATION
    ##*===============================================

    If ($deploymentType -ine ‘Uninstall’) {
    ##*===============================================
    ##* PRE-INSTALLATION
    ##*===============================================
    [string]$installPhase = ‘Pre-Installation’

    ## Show Welcome Message, close Internet Explorer if required, allow up to 3 deferrals, verify there is enough disk space to complete the install, and persist the prompt
    Show-InstallationWelcome -CloseApps ‘WINWORD,EXCEL,OUTLOOK,POWERPNT,ONENOTE,MSPUB,NitroPDF’ -BlockExecution -AllowDefer -CheckDiskSpace -PersistPrompt -CloseAppsCountdown 60

    ## Show Progress Message (with the default message)
    Show-InstallationProgress -StatusMessage “Office 365 Installation in Progress…The Installation may take up to 45 minutes to complete.”

    ## <Perform Pre-Installation tasks here>

    ##*===============================================
    ##* INSTALLATION
    ##*===============================================
    [string]$installPhase = ‘Installation’

    ## Handle Zero-Config MSI Installations
    If ($useDefaultMsi) {
    [hashtable]$ExecuteDefaultMSISplat = @{ Action = ‘Install’; Path = $defaultMsiFile }; If ($defaultMstFile) { $ExecuteDefaultMSISplat.Add(‘Transform’, $defaultMstFile) }
    Execute-MSI @ExecuteDefaultMSISplat; If ($defaultMspFiles) { $defaultMspFiles | ForEach-Object { Execute-MSI -Action ‘Patch’ -Path $_ } }
    }

    ## <Perform Installation tasks here>
    ##Show-InstallationProgress -StatusMessage “Upgrading to the NEW Office 2016. Please wait while installation completes…”
    Execute-Process -Path “.\Setup.exe” -Parameters “/configure /configuration.xml”

    ##*===============================================
    ##* POST-INSTALLATION
    ##*===============================================
    [string]$installPhase = ‘Post-Installation’

    ## <Perform Post-Installation tasks here>

    ## Display a message at the end of the install
    If (-not $useDefaultMsi) { Show-InstallationPrompt -Message ‘Your Office Upgrade has been Completed. Should you have any questions, please call the Help Desk -ButtonRightText ‘OK’ -Icon Information -NoWait }
    }
    ElseIf ($deploymentType -ieq ‘Uninstall’)
    {
    ##*===============================================
    ##* PRE-UNINSTALLATION
    ##*===============================================
    [string]$installPhase = ‘Pre-Uninstallation’

    ## Show Welcome Message, close Internet Explorer with a 60 second countdown before automatically closing
    Show-InstallationWelcome -CloseApps ‘iexplore’ -CloseAppsCountdown 60

    ## Show Progress Message (with the default message)
    Show-InstallationProgress

    ## <Perform Pre-Uninstallation tasks here>

    ##*===============================================
    ##* UNINSTALLATION
    ##*===============================================
    [string]$installPhase = ‘Uninstallation’

    ## Handle Zero-Config MSI Uninstallations
    If ($useDefaultMsi) {
    [hashtable]$ExecuteDefaultMSISplat = @{ Action = ‘Uninstall’; Path = $defaultMsiFile }; If ($defaultMstFile) { $ExecuteDefaultMSISplat.Add(‘Transform’, $defaultMstFile) }
    Execute-MSI @ExecuteDefaultMSISplat
    }

    # <Perform Uninstallation tasks here>

    ##*===============================================
    ##* POST-UNINSTALLATION
    ##*===============================================
    [string]$installPhase = ‘Post-Uninstallation’

    ## <Perform Post-Uninstallation tasks here>

    }

    ##*===============================================
    ##* END SCRIPT BODY
    ##*===============================================

    ## Call the Exit-Script function to perform final cleanup operations
    Exit-Script -ExitCode $mainExitCode
    }
    Catch {
    [int32]$mainExitCode = 60001
    [string]$mainErrorMessage = “$(Resolve-Error)”
    Write-Log -Message $mainErrorMessage -Severity 3 -Source $deployAppScriptFriendlyName
    Show-DialogBox -Text $mainErrorMessage -Icon ‘Stop’
    Exit-Script -ExitCode $mainExitCode
    }

Viewing 3 posts - 1 through 3 (of 3 total)