yralexandre

//yralexandre
yralexandre

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • yralexandre
    Participant
    Post count: 8

    I apologize for posting to the wrong forum. I’m willing to repost to the General forum if you’d prefer or feel free to move it if possible. The script is below.

    ######################### Start #########################
    <#
    .SYNOPSIS
    This script performs the installation or uninstallation of an application(s).
    .DESCRIPTION
    The script is provided as a template to perform an install or uninstall of an application(s).
    The script either performs an “Install” deployment type or an “Uninstall” deployment type.
    The install deployment type is broken down into 3 main sections/phases: Pre-Install, Install, and Post-Install.
    The script dot-sources the AppDeployToolkitMain.ps1 script which contains the logic and functions required to install or uninstall an application.
    .PARAMETER DeploymentType
    The type of deployment to perform. Default is: Install.
    .PARAMETER DeployMode
    Specifies whether the installation should be run in Interactive, Silent, or NonInteractive mode. Default is: Interactive. Options: Interactive = Shows dialogs, Silent = No dialogs, NonInteractive = Very silent, i.e. no blocking apps. NonInteractive mode is automatically set if it is detected that the process is not user interactive.
    .PARAMETER AllowRebootPassThru
    Allows the 3010 return code (requires restart) to be passed back to the parent process (e.g. SCCM) if detected from an installation. If 3010 is passed back to SCCM, a reboot prompt will be triggered.
    .PARAMETER TerminalServerMode
    Changes to “user install mode” and back to “user execute mode” for installing/uninstalling applications for Remote Destkop Session Hosts/Citrix servers.
    .PARAMETER DisableLogging
    Disables logging to file for the script. Default is: $false.
    .EXAMPLE
    Deploy-Application.ps1
    .EXAMPLE
    Deploy-Application.ps1 -DeployMode ‘Silent’
    .EXAMPLE
    Deploy-Application.ps1 -AllowRebootPassThru -AllowDefer
    .EXAMPLE
    Deploy-Application.ps1 -DeploymentType Uninstall
    .NOTES
    Toolkit Exit Code Ranges:
    60000 – 68999: Reserved for built-in exit codes in Deploy-Application.ps1, Deploy-Application.exe, and AppDeployToolkitMain.ps1
    69000 – 69999: Recommended for user customized exit codes in Deploy-Application.ps1
    70000 – 79999: Recommended for user customized exit codes in AppDeployToolkitExtensions.ps1
    .LINK

    .REVISION HISTORY
    Name, Date, Revision.
    Yves Alexandre, 07/16/2015, Added into the Param block for custom ToolkitExtension command line argument to handle Check-Exist by applying the argument seen in example below depending on the deployment type.

    [ValidateSet(‘Yes’,’No’)]
    [String] $CheckExist = ‘No’,
    [Parameter(Mandatory=$false)]

    .EXAMPLE
    Deploy-Application.ps1 -CheckExist “Yes|No” -DeploymentType “Uninstall”

    Yves Alexandre, 07/16/2015, Added $DisplayName and $DisplayVersion constant variable which are static predeifned values used to validate version in the Check-Exist query function.
    Yves Alexandre, 07/16/2015, Added $InstallDisplayName and $InstallDisplayVersion variables to status product install.

    $InstallDisplayName = Get-InstalledApplication -Name “<AppName>”
    $InstallDisplayVersion = (Get-InstalledApplication -Name “<AppName>”).DisplayVersion

    Yves Alexandre, 08/19/2015, Added $appInstallFile constant variable for external installer files that are subject to frequent release intervals to facilitate script maint.
    #>
    [CmdletBinding()]
    Param (
    [Parameter(Mandatory=$false)]
    [ValidateSet(‘Install’,’Uninstall’)]
    [string]$DeploymentType = ‘Install’,
    [Parameter(Mandatory=$false)]
    [ValidateSet(‘Yes’,’No’)]
    [String] $CheckExist = ‘No’,
    [Parameter(Mandatory=$false)]
    [ValidateSet(‘Interactive’,’Silent’,’NonInteractive’)]
    [string]$DeployMode = ‘Interactive’,
    [Parameter(Mandatory=$false)]
    [switch]$AllowRebootPassThru = $false,
    [Parameter(Mandatory=$false)]
    [switch]$TerminalServerMode = $false,
    [Parameter(Mandatory=$false)]
    [switch]$DisableLogging = $false
    )

    Try {
    ## Set the script execution policy for this process
    Try { Set-ExecutionPolicy -ExecutionPolicy ‘ByPass’ -Scope ‘Process’ -Force -ErrorAction ‘Stop’ } Catch {}

    ##*===============================================
    ##* VARIABLE DECLARATION
    ##*===============================================
    ## Variables: Application
    [string]$appVendor = ‘CAS00ACB’
    [string]$appName = ‘Wireshark’
    [string]$DisplayName = ‘Wireshark’
    [string]$appVersion = ‘1.12.7’
    [string]$DisplayVersion = ‘1.12.7’
    [string]$appInstallFileWin64 = ‘Wireshark-win64-‘ + $DisplayVersion + ‘.exe’
    [string]$appInstallFileWin32 = ‘Wireshark-win32-‘ + $DisplayVersion + ‘.exe’
    [string]$appArch = ”
    [string]$appLang = ”
    [string]$appRevision = ”
    [string]$appScriptVersion = ‘1.0.1508.13’
    [string]$appScriptDate = ‘2015.08.13’
    [string]$appScriptAuthor = ‘alexayr’
    ##*===============================================

    ##* Do not modify section below
    #region DoNotModify

    ## Variables: Exit Code
    [int32]$mainExitCode = 0

    ## Variables: Script
    [string]$deployAppScriptFriendlyName = ‘Deploy Application’
    [version]$deployAppScriptVersion = [version]’3.6.5′
    [string]$deployAppScriptDate = ’08/17/2015′
    [hashtable]$deployAppScriptParameters = $psBoundParameters

    ## Variables: Environment
    If (Test-Path -LiteralPath ‘variable:HostInvocation’) { $InvocationInfo = $HostInvocation } Else { $InvocationInfo = $MyInvocation }
    [string]$scriptDirectory = Split-Path -Path $InvocationInfo.MyCommand.Definition -Parent

    ## Dot source the required App Deploy Toolkit Functions
    Try {
    [string]$moduleAppDeployToolkitMain = “$scriptDirectory\AppDeployToolkit\AppDeployToolkitMain.ps1”
    If (-not (Test-Path -LiteralPath $moduleAppDeployToolkitMain -PathType ‘Leaf’)) { Throw “Module does not exist at the specified location [$moduleAppDeployToolkitMain].” }
    If ($DisableLogging) { . $moduleAppDeployToolkitMain -DisableLogging } Else { . $moduleAppDeployToolkitMain }
    }
    Catch {
    If ($mainExitCode -eq 0){ [int32]$mainExitCode = 60008 }
    Write-Error -Message “Module [$moduleAppDeployToolkitMain] failed to load: n$($_.Exception.Message)n `n$($_.InvocationInfo.PositionMessage)” -ErrorAction ‘Continue’
    ## Exit the script, returning the exit code to SCCM
    If (Test-Path -LiteralPath ‘variable:HostInvocation’) { $script:ExitCode = $mainExitCode; Exit } Else { Exit $mainExitCode }
    }

    #endregion
    ##* Do not modify section above
    ##*===============================================
    ##* END VARIABLE DECLARATION
    ##*===============================================

    If ($DeploymentType -ine ‘Uninstall’) {
    Show-InstallationProgress -StatusMessage “Performing system analysis, please wait…”
    ##*===============================================
    ##* PRE-INSTALLATION
    ##*===============================================
    [string]$installPhase = ‘Pre-Installation’

    $InstallDisplayName = Get-InstalledApplication -Name “Wireshark”
    $InstallDisplayVersion = (Get-InstalledApplication -Name “Wireshark”).DisplayVersion
    if ($CheckExist -ieq ‘Yes’) {Check-Exist}

    ## Close the Installation Progress Dialog if running
    Close-InstallationProgress
    ## Show Welcome Message, close Internet Explorer if required, allow up to 3 deferrals, verify there is enough disk space to complete the install, and persist the prompt
    Show-InstallationWelcome -CloseApps ‘wireshark,op_flse,aceanalyst’ -AllowDefer -DeferTimes 5 -CheckDiskSpace -PersistPrompt

    ## Show Progress Message (with the default message)
    Show-InstallationProgress

    ## <Perform Pre-Installation tasks here>

    ##*===============================================
    ##* INSTALLATION
    ##*===============================================
    [string]$installPhase = ‘Installation’

    ## Handle Zero-Config MSI Installations
    If ($useDefaultMsi) {
    [hashtable]$ExecuteDefaultMSISplat = @{ Action = ‘Install’; Path = $defaultMsiFile }; If ($defaultMstFile) { $ExecuteDefaultMSISplat.Add(‘Transform’, $defaultMstFile) }
    Execute-MSI @ExecuteDefaultMSISplat; If ($defaultMspFiles) { $defaultMspFiles | ForEach-Object { Execute-MSI -Action ‘Patch’ -Path $_ } }
    }

    ## <Perform Installation tasks here>
    Write-Log -Message “[Custom-logging] :: [$InstallName] :: Applying the appropriate architecture specific installation, please wait.”
    Start-Sleep -Seconds 10
    if ($is64Bit -eq $true) {
    Write-Log -Message “[Custom-logging] :: [$InstallName] :: Attempting to execute installer file(s), please wait.”
    Start-Sleep -Seconds 10
    Execute-Process -Path “$scriptDirectory\Source\$appInstallFileWin64” -Arguments “/S /desktopicon=no /quicklaunchicon=no” -WindowStyle Hidden -IgnoreExitCodes “1,2,3”
    } Else {
    Write-Log -Message “[Custom-logging] :: [$InstallName] :: Attempting to execute installer file(s), please wait.”
    Start-Sleep -Seconds 10
    Execute-Process -Path “$scriptDirectory\Source\$appInstallFileWin32” -Arguments “/S /desktopicon=no /quicklaunchicon=no” -WindowStyle Hidden -IgnoreExitCodes “1,2,3”
    }

    ##*===============================================
    ##* POST-INSTALLATION
    ##*===============================================
    [string]$installPhase = ‘Post-Installation’

    ## <Perform Post-Installation tasks here>
    Update-Prefs
    Start-Sleep -Seconds 10

    $InstallDisplayName = Get-InstalledApplication -Name “Wireshark”
    $InstallDisplayVersion = (Get-InstalledApplication -Name “Wireshark”).DisplayVersion
    ## Display a message at the end of the install
    If (-not $useDefaultMsi) {Check-InstallStatus}
    }
    ElseIf ($DeploymentType -ieq ‘Uninstall’)
    {
    Show-InstallationProgress -StatusMessage “Performing system analysis, please wait…”
    ##*===============================================
    ##* PRE-UNINSTALLATION
    ##*===============================================
    [string]$installPhase = ‘Pre-Uninstallation’

    $InstallDisplayName = Get-InstalledApplication -Name “Wireshark”
    $InstallDisplayVersion = (Get-InstalledApplication -Name “Wireshark”).DisplayVersion
    if ($CheckExist -ieq ‘Yes’) {Check-Exist}
    ## Close the Installation Progress Dialog if running
    Close-InstallationProgress
    ## Show Welcome Message, close Internet Explorer with a 60 second countdown before automatically closing
    Show-InstallationWelcome -CloseApps ‘wireshark,op_flse,aceanalyst’ -CloseAppsCountdown 60

    ## Show Progress Message (with the default message)
    Show-InstallationProgress

    ## <Perform Pre-Uninstallation tasks here>

    ##*===============================================
    ##* UNINSTALLATION
    ##*===============================================
    [string]$installPhase = ‘Uninstallation’

    ## Handle Zero-Config MSI Uninstallations
    If ($useDefaultMsi) {
    [hashtable]$ExecuteDefaultMSISplat = @{ Action = ‘Uninstall’; Path = $defaultMsiFile }; If ($defaultMstFile) { $ExecuteDefaultMSISplat.Add(‘Transform’, $defaultMstFile) }
    Execute-MSI @ExecuteDefaultMSISplat
    }

    # <Perform Uninstallation tasks here>
    if ($is64Bit -eq $true) {
    Write-Log -Message “[Custom-logging] :: [$InstallName] :: Attempting to execute uninstaller file(s), please wait.”
    Start-Sleep -Seconds 10
    Execute-Process -FilePath “$envProgramFiles\Wireshark\uninstall.exe” -Arguments “/S” -WindowStyle Hidden -IgnoreExitCodes “1,2,3”
    } Else {
    Write-Log -Message “[Custom-logging] :: [$InstallName] :: Attempting to execute uninstaller file(s), please wait.”
    Start-Sleep -Seconds 10
    Execute-Process -FilePath “$envProgramFilesX86\Wireshark\uninstall.exe” -Arguments “/S” -WindowStyle Hidden -IgnoreExitCodes “1,2,3”
    }

    #Display a message at the end of the uninstall
    $InstallDisplayName = Get-InstalledApplication -Name “Wireshark”
    $InstallDisplayVersion = (Get-InstalledApplication -Name “Wireshark”).DisplayVersion
    Check-UninstallStatus

    ##*===============================================
    ##* POST-UNINSTALLATION
    ##*===============================================
    [string]$installPhase = ‘Post-Uninstallation’

    ## <Perform Post-Uninstallation tasks here>

    }

    ##*===============================================
    ##* END SCRIPT BODY
    ##*===============================================

    ## Call the Exit-Script function to perform final cleanup operations
    Exit-Script -ExitCode $mainExitCode
    }
    Catch {
    [int32]$mainExitCode = 60001
    [string]$mainErrorMessage = “$(Resolve-Error)”
    Write-Log -Message $mainErrorMessage -Severity 3 -Source $deployAppScriptFriendlyName
    Show-DialogBox -Text $mainErrorMessage -Icon ‘Stop’
    Exit-Script -ExitCode $mainExitCode
    }

    ######################### Finish ########################

    Thanks,

    Yves

    • This reply was modified 2 years, 8 months ago by  yralexandre.
    • This reply was modified 2 years, 8 months ago by  yralexandre.
  • yralexandre
    Participant
    Post count: 8

    I apologize for posting to the wrong forum. I’m willing to repost to the General forum if you’d prefer or feel free to move it if possible. To answer your question Yes I meant 3.6.5 instead of 3.5.6. Secondarily, replacing -Title “$appVendor $DisplayName $DisplayVersion” with -Title $installName unfortunately does not resolve the problem, it still fails to display the Show-InstallationPrompt dialog unless the -NoWait parameter is omitted. However, even after omitting the -NoWait parameter when the Show-InstallationPrompt dialog is displayed “Riverbed Wireshark 1.12.7 01” is still being displayed in the title bar as opposed to “Riverbed Wireshark 1.12.7″ which is the real problem. The $appRevision = ” variable is left blank intentioanlly, yet it appears that it is defaulting to $appRevision = ’01’ and append itself to the end of the text in the title bar whether -Title “$appVendor $DisplayName $DisplayVersion” or -Title $installName is used or omitted.

    Thanks,

    Yves

    • This reply was modified 2 years, 8 months ago by  yralexandre.
  • yralexandre
    Participant
    Post count: 8
    in reply to: Change Log Request #531

    This makes sense, thank you for the information.

  • yralexandre
    Participant
    Post count: 8
Viewing 4 posts - 1 through 4 (of 4 total)